Application:
Operation of Pulse Transducers, type DK and EOG, is contactless.
1 or 5 pulses/revolution can be generated from the DK device.
The Pulse Transducers of type EOG generate 1, 5, 10 or 25
pulses/revolution.
The transducer’s shaft has to be coupled to the shaft of the
monitored drive. The use of the DK/EOG Pulse Transducers is
recommended in all cases where it is impossible either to install
pulse discs or to utilized other rotating machine parts for pulse
generating purposes. The Pulse Transducer DK contains an
inductive slot initiator, which is energized by a pulse disc with
1 or 5 targets.
The correct operation of the Kiepe Pulse Transducer EOG is only
guaranteed in conjunction with Kiepe Electronic Speed Monitors.
The opto-electronic transducer produces extremely step-front
pulses.
The high accuracy of the pulse disc guarantees exact
spacing, even when 25 pulses/revolution are generated.
Depending on the selection made, the transducers can produce
from 1 to 25 pulses per revolution of the shaft. The use of this
opto-electronic transducer is recommended, if high accuracy at
the switching point of the speed control system is required.
The opto-electronic Transducer EOG 025 is especially designed
to monitor drives at standstill. The transducer’s voltage feed is
supplied by the Kiepe Speed Monitor. Therefore, the Transducers
EOG require a 3-core connecting cable (e.g. 3 x 2,5 mm2).
Combined with the Kiepe Belt Drive type B, a direct control of the
conveyor belt run is obtained. A reliable slip control prevents the
conveyor belt from being damaged.
Coupling:
Technical Data:
Operating Principle:
Technical Data:
Connection Diagram:
Selection Table:
Mounting Details and Ordering Codes:
Dimensions and Ordering Codes:
Dimensions:
|