|
Pulsarlube ML500
Automatic Single Point Lubricator
Overview
The Pulsarlube ML500 is primarily designed to ensure reliable lubrication of larger bearings (i.e. >102 mm = 4" O.D.) commonly found in industries such as mining, cement, and steel.
The lubricant is supplied in 500cc volumes per grease pack, which is replaceable along with a Pulsarlube battery pack.
The ML500 offers 8 optional dispensing rates from Half (H) to 24 months.
The ML500 gives you double the value with its increased grease volume capacity and double the programmable time, ultimately increasing your equipment's uptime and your bottom line.
Specifications
Battery selection is necessary to use Pulsarlube ML500 with large volume, long-term mode of up to 24 months, and remote multi-point installation.
Features of the Pulsarlube ML500
- Large 500cc grease capacity
- Operates in wide temp range from -10℃~60℃ (14℉~140℉)
- Unrivaled operating pressure over 30kgf/㎠ (425psi)
- 8 variable dispensing options from 1/2 to 24 months in a single unit
- Lubricate up to 8 points 6m (20ft) per line
- Easy-to-replace grease and battery pack within seconds
Battery pack type needed may vary depending upon type of application. Please see chart below.
LCD Display
Battery Selection Guide
Download PDF
|